1. Post Processor

Co-Partner : Mukul Gupta
Guide : Dr. Sanjay Mittal
Status : Part Time, Non Paid
It can be used for post processing work, like contour, isosurface, vector plotting, sectioning, volume rendering etc. on a discretized domain for which a grid has been developed.
Check out these pages to see the results
• Flow past a Square Cylinder ( 2D )
• Flow past a Square Cylinder ( 3D )
• Reyleigh Benard Heat Convection ( 2D & 3D )
• Flow in a Spiral Casing of a Hydraulic Turbine ( 3D )
• Flow past a Circular Cylinder ( 2D )
• Flow past a Circular Cylinder ( 3D )



 

2. Graphics Robot Generator

Co-Partner : Mukul Gupta
Guide : Dr. Amitabha Mukherjee
Status : Part Time, Non Paid
An articulated object editor and simulator used for animating robots and other articulated objects in 3D with action dynamics.
Check out these pages to see the results
• Some simulated robot models
• Man in motion

 

 


 
 
3. From Footprints to Animation

Co-Partner : Ashutosh Nandan
Guide : Dr. Amitabha Mukherjee
Status : Course project (in ME451 CAED), Non-paid
Positioning articulated objects such as animals is a very complex problem in graphic simulation. Here, a walking gait is defined based on each footstep and its duration.
Check out these pages to see the results
• Man in motion


 

4. Omnidirectional Robot

Co-Partner : Rahul Pandey, Rishi Kohli
Guide : Dr. Amitabha Mukherjee
Status : B.Tech Project, Non-paid
• A robot which has three degrees of freedom (x,y,w) with three independent motors, and can pivot simply like an office chair on casters.

 
 
 
 
 
 
5. Analysis of various quality problems

Co-Partner : Ashish Adya
Guide : Mr. Praveen Gupta
Status : Industrial Training, Paid
Organisation : Maruti Udyog Limited, Gurgaon, India
Stipend : Rs. 3000.00 + TA
• Quality control is a very important aspect of manufacturing. This project was a study on various quality problems of Maruti cars.
 
6. Simulation of various Computational Fluid Dynamics Problems

Guide : Dr. S. Pavithran
Status : Industrial Training, Paid
Organisation : Fluent Inc., Pune, India
Stipend : Rs. 1000.00 + accomodation
• Various computational Fluid Dynamics Problems were simulated using Fluent software.

 
7. Testing and Validation of Fluent Software

Guide : Dr. Gautam Biswas
Status : Part Time, Paid
Stipend : Rs. 1600.00
• Installing the Fluent Software on a Dec-Alpha server in the CFD Lab. of Mechanical Dept. of IIT Kanpur and running a few test cases.


8. Noise Removal, Three Dimensional Reconstruction and Data Retrieval for Optical Images of Stratified Fluids

Guide : Dr. K.Murlidhar
Status : Part Time, Paid
Stipend : Rs. 6000.00
• Post Processing work on 3D data generated using Tomography by Dr. Debashish Mishra, a Ph.D. student. See this page for results.

 
9. Modelling and Simulation of Enhanced Oil Recovery using Parallel Computers.

Guide : Dr. Gautam Biswas
Status : Part Time, Paid
Stipend : Rs. 3000.00

This page last updated on  Mon Jan  4 23:08:40 IST 1999